Kangaroo Hydraulic Lift
Information on troubleshooting your Kangaroo hydraulic lift
When the wooden block is removed from the lift prior to installation, the cylinder retracts shortening the cable ends. When this occurs, you'll need to ...
Thu, 1 Aug, 2024 at 2:03 PM
Thu, 15 Aug, 2024 at 11:00 AM
If you need to remove a defective lift to install a new one, below is information on how to do this without removing the top panel from your Kangaroo & ...
Thu, 1 Aug, 2024 at 2:04 PM
Step 1: Locate your platform panel and hydraulic sewing lift Step 2: Screw the hydraulic lift to the platform using the assigned 4 scr...
Wed, 28 Feb, 2024 at 12:09 PM
Below are solutions to move your hydraulic lift out of the storage position. If you have an electric lift, please visit here. 1. Spray WD-40 or lubrican...
Thu, 18 Apr, 2024 at 2:30 PM
If your lift platform is uneven in the free arm position, we have found a simple solution to get you back to sewing. You'll need some 1/4" flat was...
Wed, 17 Apr, 2024 at 1:53 PM